GeoPull Box is a mechanical tool that enables a single technician to measure the full profile of a horizontal inclinometer — without crossing to the other end of the borehole, without a second colleague.
We measured horizontal inclinometers manually for years. We know exactly where time is lost and where errors occur — that is why we designed a better way.
Every measurement ties up two workers — time, transport, coordination. GeoPull Box solves this: one technician, one side, full profile.
One pulls in, the other pulls out — but there is no direct contact across the embankment. Every probe correction means communicating by phone or radio. Every misunderstanding costs time.
If a single technician makes an error, they must cross to the other side, re-insert the probe, return — and only then continue. On an active construction site, that is more than just lost time.
GeoPull Box uses an auxiliary tube and a rope to pull the probe into the borehole — the full profile is measured from one side. When you need to adjust the probe position, simply move it with the cable or rope exactly where needed. No crossings, no coordination. Just precise measurement.
The box attaches to the borehole entry in under a minute. Compatible with standard inclinometer casings — no special modifications required.
The auxiliary tube carries the rope forming a U-loop. The technician stays on one side — the probe is pulled to the far end and retrieved from the same position.
The technician retrieves the probe via cable, monitors the instrument and controls the rope — all from one position. No radio calls, no embankment crossings.
Full control over probe position at any time. If a correction is needed, simply reposition the probe — it takes seconds, not minutes spent crossing the embankment.
Not just faster measurement — a different way of working. Fewer people in the field, safer procedure, more reliable data.
A 100 m profile takes one technician significantly less time than two working manually. You can measure more sites per day.
GeoPull Box requires no colleague on the other side. One technician handles the full measurement cycle — from setup to probe retrieval.
When measuring during operation (motorways, railways), there is no need to cross an active embankment. The technician remains on one side throughout the entire measurement.
Works with standard inclinometer probes and casings. No replacement of existing equipment — GeoPull Box simply adds to your current setup.
"GeoPull Box significantly reduced our measurement time. As a result, we can complete more profiles in a single day than before."
"You can tell this was designed by someone who has actually been in the field. Every detail shows it — from mounting to the measurement process. Nothing unnecessary, everything functional."
Write to us — we are happy to answer technical questions.
We respond within 1 business day.